How do I know the BatteryMAX is working?
If the Red light is blinking the BatteryMAX is working.

Can I see something other than the light that lets me know the unit is functioning?
Yes, using a voltage meter that has a current scale (ma) set to 300ma max. Put the voltmeter in line with the battery. You will notice the power spikes which exercise the internal workings of the battery.

I have seen the photo's from the electron microscrope and would still like to know if there is any procedure for recognizing the effect of BatteryMAX?
Yes, utilising a battery at least three years old, follow this procedure:

BEFORE installing the BatteryMAX to the old battery!

1. Charge the old battery.
2. Read the voltage of the charged battery with an accurate volt meter, and check the cells specific gravity of each cell with a hydrometer.
3. Discharge the old battery about 50%.
4. Now! Install the BatteryMAX.
5. Leave the BatteryMAX working (blinking) for 21 days (24 hours per day), at this 50% charge levels.
6. Charge the old battery overnight!
7. Read the voltage Increase with an accurate volt meter and check the specific gravity readings from improvements with the hydrometer.

Does BatteryMAX also increase efficiency as well as life?
BatteryMAX helps keep the battery in as new condition as possible. It does not increase the power efficiency past the new rating of the battery.

If the BatteryMAX increases the life expectancy of the battery, then how can we convince you practically?
Practically, the efficiently of the normal battery gradually declines due to the plate
Sulfaton - Therefore practically - if the plates are maintained in an as new condition - then practically the normal life expectancy would be increased.

If the Battery of a car wears out how will we know if BatteryMAX has worn out or whether it is still usable if used with a new battery?
As long as the red light is blinking the BatteryMAX is working at full capacity.

Can the BattteryMAX fail if hooked-up incorrectly?
Yes, if the polarities are reversed. The late models are diode protected to a certain degree.

Is it OK to have only one BatteryMAX for 4 batteries if the voltage remains at 12 volts?
YES
"As long as the total voltage does not exceed the rated voltage of the BatteryMAX" is the rule. EXAMPLE: Two batteries 12 volt hooked in series with a total voltage of 24 volts could use a 24 volt BatteryMAX. OR Two 12 volt Batteries hooked in parallel with a total voltage of 12 volts could use a 12 volt BatteryMAX. If the same two batteries were hooked in series with a total voltage of 24 volts, you could tap in to each 12 volt battery and use two 12 volt BatteryMAX, but this way your using too may BatteryMAX devices to do the job.

Is BatteryMAX ok for 24 volt and more than one battery at the same time?
No, you must use a specific model of BatteryMAX 12 volt - 24 volt - 36 volt.

Do you have a Independent condition confirmed?
Yes, please refer to the American Certified Laboratories Report.(contact us for a copy of this)

On the 36 and 48 volt models does the blinking lights frequency vary?
Yes.

How can a batteries condition be confirmed?
The standard method is by checking its specific gravity. All hydrometers have a color as well as numerical indicators. Most batteries are discarded when one cell falls below the excepted range on htse specific gravity range, however this is mostly due to sulfaction of which the BattereyMAX is to neutralise. BatteryMAX can only be used on voltage below or not above the model number. Using a BatteryMAX on the voltage close to thse model number is recommended.

What is he maximum temperature that the casting will withstand?
200F

BACK